8456
Multi Point Set Euro Profile
Lever 3-11/16″
Escutcheon 2-1/2″ x 14″
-
Specifications
Part Number:8456
Part Description:Multi Point Set Euro Profile
Product Dimensions:Lever 3-11/16″
Escutcheon 2-1/2″ x 14″Applications:2″ X 14″ MULTI POINT SETS
8450 Lever Euro M/P Set – ENTRANCE
8451 Lever Euro M/P Set – FULL DUMMY
8452 Lever Euro M/P Set – ACTIVE DUMMY
8453 Lever Euro M/P Set – PATIO
Above sets include 8557 Lever2-1/2″ X 14″ MULTI POINT SETS
8456 Lever Euro M/P Set – ENTRANCE
8457 Lever Euro M/P Set – FULL DUMMY
8458 Lever Euro M/P Set – ACTIVE DUMMY
8459 Lever Euro M/P Set – PATIO
Above sets include 8557 LeverMaterial:Solid BrassSpindles:8mm SQ (standard)
-
How to Order
Ordering Instructions:
1. Specify application.
2. See our M/P Check Sheet (Form 500) for additional information.
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/4″.
5. Specify hand of door – RH/LH.
6. Specify fixed or active exterior lever when ordering active dummy set.Remember:1. Complete our M/P Check Sheet (Form 500).
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. All levers are interchangeable.
4. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm x K x TP (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
5. Cylinders INCLUDED with all applications (collection turnpiece attached).
6. Strike not included.
7. Custom drilling available.
8. Euro offset cylinders and custom lengths available upon request. -
Set Components
Lever Euro M/P Set – ENTRANCE Includes two escutcheons, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
Lever Euro M/P Set – FULL DUMMY Includes two escutcheons, two levers, 4″ straight spindle (8mm), two dummy mount plates and mounting hardware.
Lever Euro M/P Set – ACTIVE DUMMY Includes two escutcheons, two levers, 4″ swivel spindle (8mm), dummy mount plates for exterior and mounting hardware.
Lever Euro M/P Set – PATIO Includes exterior escutcheon, interior escutcheon, two levers, 4″ straight spindle (8mm), euro profile half cylinder – 31mm and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
Lever 3-11/16″
Escutcheon 2-1/2″ x 14″
2″ X 14″ MULTI POINT SETS
8450 Lever Euro M/P Set – ENTRANCE
8451 Lever Euro M/P Set – FULL DUMMY
8452 Lever Euro M/P Set – ACTIVE DUMMY
8453 Lever Euro M/P Set – PATIO
Above sets include 8557 Lever
2-1/2″ X 14″ MULTI POINT SETS
8456 Lever Euro M/P Set – ENTRANCE
8457 Lever Euro M/P Set – FULL DUMMY
8458 Lever Euro M/P Set – ACTIVE DUMMY
8459 Lever Euro M/P Set – PATIO
Above sets include 8557 Lever
Solid Brass
8mm SQ (standard)
1. Specify application.
2. See our M/P Check Sheet (Form 500) for additional information.
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/4″.
5. Specify hand of door – RH/LH.
6. Specify fixed or active exterior lever when ordering active dummy set.
1. Complete our M/P Check Sheet (Form 500).
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. All levers are interchangeable.
4. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm x K x TP (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
5. Cylinders INCLUDED with all applications (collection turnpiece attached).
6. Strike not included.
7. Custom drilling available.
8. Euro offset cylinders and custom lengths available upon request.
Lever Euro M/P Set – ENTRANCE Includes two escutcheons, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
Lever Euro M/P Set – FULL DUMMY Includes two escutcheons, two levers, 4″ straight spindle (8mm), two dummy mount plates and mounting hardware.
Lever Euro M/P Set – ACTIVE DUMMY Includes two escutcheons, two levers, 4″ swivel spindle (8mm), dummy mount plates for exterior and mounting hardware.
Lever Euro M/P Set – PATIO Includes exterior escutcheon, interior escutcheon, two levers, 4″ straight spindle (8mm), euro profile half cylinder – 31mm and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
