8227
Knob and Escutcheon

Knob 2-1/4″
Escutcheon 2-3/8″ x 12″

Solid Brass

8mm SQ (standard)

1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.

1. All knobs are interchangeable.
2. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
3. Standard backset is 2-3/8″ for tubular. If required, specify 2-3/4″.
4. Custom drilling available.
5. Combination strike and faceplate available for latch x mortise bolt function.
6. Oval slot head wood screws (4/ea) are standard on the escutcheons.

Knob Escutcheon Set – PASSAGE Includes two escutcheons, two knobs, 4″ straight spindle (8mm), passage latch K x K (2-3/8″ backset), faceplate, full lip strike, dust box and mounting hardware.

Knob Escutcheon Set – PRIVACY Includes two escutcheons with privacy pin hole, two knobs, 4″ swivel spindle (8mm), privacy latch K x K (2-3/8″ backset), privacy pin, faceplate, full lip strike, dust box and mounting hardware.

Knob Escutcheon Set – LATCH x MORTISE BOLT Includes an exterior escutcheon w/ EE hole, an interior escutcheon w/ turnpiece attached, two knobs, 4″ straight spindle (8mm), passage latch K x K (2-3/8″ backset) latch faceplate, full lip strike, mortise bolt (2-3/8″ backset), mortise bolt faceplate, mortise bolt strike, dust boxes and mounting hardware. NOTE: our standard spacing between knob hub and mortise bolt is 2-3/4″.

Knob Escutcheon Set – FULL DUMMY Includes two escutcheons, two knobs, 4″ straight spindle (8mm), two dummy mounting plates and mounting hardware.

Knob Escutcheon Set – HALF DUMMY Includes an escutcheon, knob, dummy mount spindle and mounting hardware.