7864
Multi Point Set American Profile
Lever 4-1/8″
Escutcheon 2″ x 11″
-
Specifications
Part Number:7864
Part Description:Multi Point Set American Profile
Product Dimensions:Lever 4-1/8″
Escutcheon 2″ x 11″Applications:2″ X 11″ MULTI POINT SETS
7864 Lever Amer M/P Set – ENTRANCE
7865 Lever Amer M/P Set – FULL DUMMY
7866 Lever Amer M/P Set – ACTIVE DUMMY
7867 Lever Amer M/P Set – PATIO
Above sets include 7973 Lever2-1/2″ X 12″ MULTI POINT SETS
7870 Lever Amer M/P Set – ENTRANCE
7871 Lever Amer M/P Set – FULL DUMMY
7872 Lever Amer M/P Set – ACTIVE DUMMY
7873 Lever Amer M/P Set – PATIO
Above sets include 7973 LeverMaterial:Solid BrassSpindles:8mm SQ (standard) -
How to Order
Ordering Instructions:
1. Specify application.
2. See our M/P Check Sheet (Form 500) for additional information.
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/4″.
5. Specify hand of door – RH/LH.
6. Specify fixed or active exterior lever when ordering active dummy set.Remember:1. Complete our M/P Check Sheet (Form 500).
2. Standard M/P American cylinder applications: LEVER LOW – 92mm spacing.
3. Specify LEVER HIGH or custom c-c spacing if required.
4. All levers are interchangeable.
5. American cylinder included with Entrance function only.
6. Strike not included.
7. Custom escutcheon sizes drilling available.
8. HUTTER ARCH edge profile is standard. SQUARE CORNER and OFFSET edge options available. -
Set Components
Lever Amer M/P Set – ENTRANCE Includes two escutcheons, two levers, 4″ straight spindle (8mm), American profile cylinder and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
Lever Amer M/P Set – FULL DUMMY Includes two escutcheons, two levers, 4″ straight spindle (8mm), two dummy mount plates and mounting hardware.
Lever Amer M/P Set – ACTIVE DUMMY Includes two escutcheons, two levers, 4″ swivel spindle (8mm), dummy mount plates for exterior and mounting hardware.
Lever Amer M/P Set – PATIO Includes exterior escutcheon, interior escutcheon (for American profile application turnpiece w/ tailpiece attached to escutcheon), two levers, 4″ straight spindle (8mm) and mounting hardware. NOTE: our standard spacing between lever hub and the turnpiece is 92mm.
- Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
Lever 4-1/8″
Escutcheon 2″ x 11″
2″ X 11″ MULTI POINT SETS
7864 Lever Amer M/P Set – ENTRANCE
7865 Lever Amer M/P Set – FULL DUMMY
7866 Lever Amer M/P Set – ACTIVE DUMMY
7867 Lever Amer M/P Set – PATIO
Above sets include 7973 Lever
2-1/2″ X 12″ MULTI POINT SETS
7870 Lever Amer M/P Set – ENTRANCE
7871 Lever Amer M/P Set – FULL DUMMY
7872 Lever Amer M/P Set – ACTIVE DUMMY
7873 Lever Amer M/P Set – PATIO
Above sets include 7973 Lever
Solid Brass
8mm SQ (standard)
1. Specify application.
2. See our M/P Check Sheet (Form 500) for additional information.
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/4″.
5. Specify hand of door – RH/LH.
6. Specify fixed or active exterior lever when ordering active dummy set.
1. Complete our M/P Check Sheet (Form 500).
2. Standard M/P American cylinder applications: LEVER LOW – 92mm spacing.
3. Specify LEVER HIGH or custom c-c spacing if required.
4. All levers are interchangeable.
5. American cylinder included with Entrance function only.
6. Strike not included.
7. Custom escutcheon sizes drilling available.
8. HUTTER ARCH edge profile is standard. SQUARE CORNER and OFFSET edge options available.
Lever Amer M/P Set – ENTRANCE Includes two escutcheons, two levers, 4″ straight spindle (8mm), American profile cylinder and mounting hardware. NOTE: our standard spacing between lever hub and the profile cylinder is 92mm.
Lever Amer M/P Set – FULL DUMMY Includes two escutcheons, two levers, 4″ straight spindle (8mm), two dummy mount plates and mounting hardware.
Lever Amer M/P Set – ACTIVE DUMMY Includes two escutcheons, two levers, 4″ swivel spindle (8mm), dummy mount plates for exterior and mounting hardware.
Lever Amer M/P Set – PATIO Includes exterior escutcheon, interior escutcheon (for American profile application turnpiece w/ tailpiece attached to escutcheon), two levers, 4″ straight spindle (8mm) and mounting hardware. NOTE: our standard spacing between lever hub and the turnpiece is 92mm.
- Specify EDGE DETAIL — Hutter ARCH edge option is standard. If alternate EDGE DETAIL is required — make sure to specify as SUB (example – SUB OFFSET ARCH).
- Hutter ARCH profile is standard. If SQUARE profile required, please specify as SUB (example – SUB SQUARE).
- Custom escutcheon sizes are available.
- Standard escutcheon thickness is 1/4”— alternate thickness available upon request.
- Contact us to discuss custom edge details or profiles.
