7726
Knob and Square Rose
Knob 2-3/8″
Square Rose 2″
-
Specifications
Part Number:7726
Part Description:Knob and Square Rose
Product Dimensions:Knob 2-3/8″
Square Rose 2″Applications:7702 Knob Set – PASSAGE
7710 Knob Set – PRIVACY
7718 Knob Set – FULL DUMMY
7726 Knob Set – HALF DUMMY
7765 Knob Only 2-3/8″
7778 Square Rose Only 2″Material:Solid Brass
-
How to Order
Ordering Instructions:
1. Specify application.
2. Specify if pre-drilled adapters are required (part #9749).
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/8″.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.
6. Specify hand of door – RH/LH for mortise applications.Remember:1. Specify pre-drilled adapter (#9749) for 2-1/8″ pre-drilled doors, which requires the large rose.
2. Consider utilizing an interior mortise lock for quality installations.
3. All knobs and levers are interchangeable.
4. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
5. Standard backset is 2-3/8″ for tubular. If required, specify 2-3/4″.
6. ONE STEP edge profile is standard. Specify TWO STEP BEVEL or SLAB edge profile if required. -
Set Components
Knob Set – PASSAGE Includes two rosettes (passage), two knobs, passage latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ straight spindle (8mm), two rosette mount plates, two rosette mount plate hubs, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – PRIVACY Includes two rosettes (privacy), two knobs, privacy latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ swivel spindle (8mm), two rosette mount plates, two rosette mount plate hubs, privacy pin, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm), two dummy rosette mount plates, two rosette mount plate hubs and mounting hardware.
Knob Set – HALF DUMMY Includes rosette, knob, dummy mount spindle, rosette mount plate hub and mounting hardware.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
Knob 2-3/8″
Square Rose 2″
7702 Knob Set – PASSAGE
7710 Knob Set – PRIVACY
7718 Knob Set – FULL DUMMY
7726 Knob Set – HALF DUMMY
7765 Knob Only 2-3/8″
7778 Square Rose Only 2″
Solid Brass
1. Specify application.
2. Specify if pre-drilled adapters are required (part #9749).
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/8″.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.
6. Specify hand of door – RH/LH for mortise applications.
1. Specify pre-drilled adapter (#9749) for 2-1/8″ pre-drilled doors, which requires the large rose.
2. Consider utilizing an interior mortise lock for quality installations.
3. All knobs and levers are interchangeable.
4. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
5. Standard backset is 2-3/8″ for tubular. If required, specify 2-3/4″.
6. ONE STEP edge profile is standard. Specify TWO STEP BEVEL or SLAB edge profile if required.
Knob Set – PASSAGE Includes two rosettes (passage), two knobs, passage latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ straight spindle (8mm), two rosette mount plates, two rosette mount plate hubs, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – PRIVACY Includes two rosettes (privacy), two knobs, privacy latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ swivel spindle (8mm), two rosette mount plates, two rosette mount plate hubs, privacy pin, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm), two dummy rosette mount plates, two rosette mount plate hubs and mounting hardware.
Knob Set – HALF DUMMY Includes rosette, knob, dummy mount spindle, rosette mount plate hub and mounting hardware.
- Specify EDGE DETAIL — ONE STEP edge option is standard. If alternate EDGE DETAIL is required — make sure to specify as SUB (example – SUB BEVEL).
- Custom escutcheon sizes are available.
- Standard escutcheon thickness is 1/4”— alternate thickness available upon request.
- Contact us to discuss custom edge details or profiles.
