7410
Square Cremone
1-1/2″ x 9″
-
Specifications
Part Number:7410
Part Description:Square Cremone
Product Dimensions:1-1/2″ x 9″
Applications:7410 Interior Cremone Only – PASSAGE
7411 Interior Cremone Only – PRIVACY
7412 Interior Cremone Only – HALF DUMMY
7413 Interior Cremone Only – M/P EURO – PATIO
7414 Interior Cremone Only – M/P EURO – ACTIVE DUMMY
7415 Interior Cremone Only – MORTISE – PATIO
7418 Full Guide 1-1/2″ x 3-1/4″
7419 Half Guide 2-1/2″ x 2″
Above sets include 7373 LeverMaterial:Solid BrassSpindles:8mm SQ (standard)
-
How to Order
Ordering Instructions:
1. Specify application.
2. See our Cremone Bolt Check Sheet (Form 503) for additional information.
3. Specify exterior trim – must be ordered seperately.
4. Specify finish. If split finish is required, please indicate exterior/interior.
5. Specify door thickness. Standard thickness is 1-3/4″.
6. Specify hand of door – RH/LH.
7. Specify door height. Standard is 84″.
8. Specify lever height from finished floor. Standard is 36″.
9. If mortise or tubular, specify lock/latch type and backset.
– standard for mortise lock is 2-1/2″.
– standard for tubular is 2-3/8″.
10. REMINDER – all cremone sets are interior trim only. NO locks, latches, cremone cassettes or euro cylinder collars are included.Remember:1. Cremones are interior trim only.
2. Locks, latches, cremone cassettes or euro cylinder collars NOT included – must be ordered separately.
3. Cremone rods are FIXED for all sets except where cremone cassette is specified.
4. Any knob or lever can be used with the cremone.
5. Cremone cassettes are available for passage (#9907), privacy (#9908) and entrance (#9909) function.
6. Custom strikes available upon request. -
Set Components
Interior Cremone Only – PASSAGE Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, universal strike, mortise strike, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – PRIVACY Includes cremone housing w/ extended turnpiece attached, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, universal strike, mortise strike, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – HALF DUMMY Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – M/P EURO – PATIO Includes cremone housing (machined for euro profile cylinder), lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – M/P EURO – ACTIVE DUMMY Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – MORTISE – PATIO Includes cremone housing w/ extended turnpiece attached, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, two full guides, two half guides, straight spindle (8mm) and mounting hardware.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
1-1/2″ x 9″
7410 Interior Cremone Only – PASSAGE
7411 Interior Cremone Only – PRIVACY
7412 Interior Cremone Only – HALF DUMMY
7413 Interior Cremone Only – M/P EURO – PATIO
7414 Interior Cremone Only – M/P EURO – ACTIVE DUMMY
7415 Interior Cremone Only – MORTISE – PATIO
7418 Full Guide 1-1/2″ x 3-1/4″
7419 Half Guide 2-1/2″ x 2″
Above sets include 7373 Lever
Solid Brass
8mm SQ (standard)
1. Specify application.
2. See our Cremone Bolt Check Sheet (Form 503) for additional information.
3. Specify exterior trim – must be ordered seperately.
4. Specify finish. If split finish is required, please indicate exterior/interior.
5. Specify door thickness. Standard thickness is 1-3/4″.
6. Specify hand of door – RH/LH.
7. Specify door height. Standard is 84″.
8. Specify lever height from finished floor. Standard is 36″.
9. If mortise or tubular, specify lock/latch type and backset.
– standard for mortise lock is 2-1/2″.
– standard for tubular is 2-3/8″.
10. REMINDER – all cremone sets are interior trim only. NO locks, latches, cremone cassettes or euro cylinder collars are included.
1. Cremones are interior trim only.
2. Locks, latches, cremone cassettes or euro cylinder collars NOT included – must be ordered separately.
3. Cremone rods are FIXED for all sets except where cremone cassette is specified.
4. Any knob or lever can be used with the cremone.
5. Cremone cassettes are available for passage (#9907), privacy (#9908) and entrance (#9909) function.
6. Custom strikes available upon request.
Interior Cremone Only – PASSAGE Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, universal strike, mortise strike, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – PRIVACY Includes cremone housing w/ extended turnpiece attached, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, universal strike, mortise strike, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – HALF DUMMY Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – M/P EURO – PATIO Includes cremone housing (machined for euro profile cylinder), lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – M/P EURO – ACTIVE DUMMY Includes cremone housing, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, three full guides, two half guides, straight spindle (8mm) and mounting hardware.
Interior Cremone Only – MORTISE – PATIO Includes cremone housing w/ extended turnpiece attached, lever (attached), upper surface bolt rod w/ rod guides assembled, lower surface bolt rod w/ rod guides assembled, two full guides, two half guides, straight spindle (8mm) and mounting hardware.
