7230
Multi Point Set Euro Sectional
1-1/4″ x 3″
-
Specifications
Part Number:7230
Part Description:Multi Point Set Euro Sectional
Product Dimensions:1-1/4″ x 3″
Applications:7230 Lever Euro M/P Sectional Set – ENTRANCE
7231 Lever Euro M/P Sectional Set – FULL DUMMY
7232 Lever Euro M/P Sectional Set – ACTIVE DUMMY
7233 Lever Euro M/P Sectional Set – PATIO
Above sets include 7973 LeverMaterial:Solid Brass
-
How to Order
Ordering Instructions:
1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify fixed or active exterior lever when ordering active dummy set.Remember:1. VERIFY door prep will be fully covered by sectional trim.
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm K x T/P (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
4. Cylinders INCLUDED with all applications (collection turnpiece attached).
5. Custom rose and cylinder collar sizes available.
6. Strike not included.
7. Euro offset cylinders and custom lengths available upon request. -
Set Components
Lever Euro M/P Sectional Set – ENTRANCE Includes two rosettes, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and surface mounting screws.
Lever Euro M/P Sectional Set – FULL DUMMY Includes two rosettes, two levers, 4″ straight spindle (8mm), full dummy mounting hardware and surface mounting screws.
Lever Euro M/P Sectional Set – ACTIVE DUMMY Includes two rosettes, two levers, 4″ swivel spindle (8mm), full dummy mounting hardware for exterior rosette.
Lever Euro M/P Sectional Set – PATIO Includes two rosettes, two levers, one euro cylinder collar, euro profile half cylinder (31mm), 4″ straight spindle (8mm) and surface mounting screws.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
1-1/4″ x 3″
7230 Lever Euro M/P Sectional Set – ENTRANCE
7231 Lever Euro M/P Sectional Set – FULL DUMMY
7232 Lever Euro M/P Sectional Set – ACTIVE DUMMY
7233 Lever Euro M/P Sectional Set – PATIO
Above sets include 7973 Lever
Solid Brass
1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify fixed or active exterior lever when ordering active dummy set.
1. VERIFY door prep will be fully covered by sectional trim.
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm K x T/P (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
4. Cylinders INCLUDED with all applications (collection turnpiece attached).
5. Custom rose and cylinder collar sizes available.
6. Strike not included.
7. Euro offset cylinders and custom lengths available upon request.
Lever Euro M/P Sectional Set – ENTRANCE Includes two rosettes, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and surface mounting screws.
Lever Euro M/P Sectional Set – FULL DUMMY Includes two rosettes, two levers, 4″ straight spindle (8mm), full dummy mounting hardware and surface mounting screws.
Lever Euro M/P Sectional Set – ACTIVE DUMMY Includes two rosettes, two levers, 4″ swivel spindle (8mm), full dummy mounting hardware for exterior rosette.
Lever Euro M/P Sectional Set – PATIO Includes two rosettes, two levers, one euro cylinder collar, euro profile half cylinder (31mm), 4″ straight spindle (8mm) and surface mounting screws.
