17524
Entrance Knob Set
Sectional

Knob 2-1/4″
Square Rose 2″

Solid Brass

8mm SQ (standard)

1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify backset.
– standard for mortise lock is 2-1/2″.
– standard for auxiliary deadbolt is 2-3/8″.

1. Standard mortise lock is 2-1/2″ EE. Specify 2-3/4″ if required.
2. Standard latch x auxiliary deadbolt: 5-1/2″ c-c spacing and 2-3/8″ backset. If required, specify 2-3/4″ backset.
3. All knobs are interchangeable.
4. A door thickness greater than 1-3/4″ will require a #9901 thick door kit for mortise application.
5. Undermount is standard. Surface mount oval slot head screws available.

Entrance Knob Sectional Set – Mortise Lock Includes two rosettes, two knobs, 4″ swivel spindle (8mm), turnpiece and plate, cylinder collar, Accurate 9124 K x K mortise lock (2-1/2″ backset), mortise cylinder, faceplate, strike 1-1/4″ LTC, dust box an mounting hardware.

Entrance Knob Sectional Set – Latch x Auxiliary Deadbolt Includes two rosettes, two knobs, passage latch K x K (2-3/8″ backset), 4″ straight spindle (8mm), auxiliary deadbolt turnpiece and plate (2-3/8″ backset), cylinder collar, auxiliary deadbolt cylinder, faceplates, full lip strikes, dust boxes and mounting hardware. NOTE: our standard spacing between knob hub and auxiliary deadbolt is 5-1/2″c-c.

Entrance Knob Sectional Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm) and full dummy mounting hardware.