17336
Inset Cross Hatch Knob and Rose
Inset Cross Hatch Knob 2-1/4″
Square Rose 2-1/2″
-
Specifications
Part Number:17336
Part Description:Inset Cross Hatch Knob and Rose
Product Dimensions:Inset Cross Hatch Knob 2-1/4″
Square Rose 2-1/2″Applications:2″ ROSE SETS
17322 Inset Cross Hatch Knob Set – PASSAGE
17323 Inset Cross Hatch Knob Set – PRIVACY
17324 Inset Cross Hatch Knob Set – SECTIONAL PRIVACY
17325 Inset Cross Hatch Knob Set – FULL DUMMY
17326 Inset Cross Hatch Knob Set – HALF DUMMY
17327 Inset Cross Hatch Knob Mortise Set – PASSAGE
17328 Inset Cross Hatch Knob Mortise Set – PRIVACY2-1/2″ ROSE SETS
17332 Inset Cross Hatch Knob Set – PASSAGE
17333 Inset Cross Hatch Knob Set – PRIVACY
17334 Inset Cross Hatch Knob Set – SECTIONAL PRIVACY
17335 Inset Cross Hatch Knob Set – FULL DUMMY
17336 Inset Cross Hatch Knob Set – HALF DUMMY
17320 Inset Cross Hatch Knob Only 2-1/4″
17176 Square Rose Only 2″
17177 Square Rose Only 2-1/2″Material:Solid Brass
-
How to Order
Ordering Instructions:
1. Specify application.
2. Specify if pre-drilled adapters are required (part #9749).
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/8″.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.
6. Specify hand of door – RH/LH for mortise applications.Remember:1. Specify pre-drilled adapter (#9749) for 2-1/8″ pre-drilled doors, which requires the large rose.
2. Specify interior mortise lock for quality installations.
3. All knobs and levers are interchangeable.
4. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
5. A door thickness greater than 1-3/4″ will require a #9900 thick door kit for mortise application.
6. SLAB edge is standard. Specify COIN or CROSS HATCH edge detail if required.
7. Combination strike and faceplate available for sectional tubular privacy function. -
Set Components
Knob Set – PASSAGE Includes two rosettes (passage), two knobs, passage latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ straight spindle (8mm), two rosette mount plates, two rosette mount plate hubs, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – PRIVACY Includes two rosettes (privacy), two knobs, privacy latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ swivel spindle (8mm), two rosette mount plates, two rosette mount plate hubs, privacy pin, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm), two dummy rosette mount plates, two rosette mount plate hubs and mounting hardware.
Knob Set – HALF DUMMY Includes rosette, knob, dummy mount spindle, rosette mount plate hub and mounting hardware.
Knob Mortise Set – PASSAGE Includes two rosettes, two knobs, 4″ straight spindle (8mm), Accurate 9825 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.
Knob Mortise Set – PRIVACY Includes two rosettes, two knobs, turnpiece and backplate, emergency egress trim, 4″ straight spindle (8mm), Accurate 9839 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
Inset Cross Hatch Knob 2-1/4″
Square Rose 2-1/2″
2″ ROSE SETS
17322 Inset Cross Hatch Knob Set – PASSAGE
17323 Inset Cross Hatch Knob Set – PRIVACY
17324 Inset Cross Hatch Knob Set – SECTIONAL PRIVACY
17325 Inset Cross Hatch Knob Set – FULL DUMMY
17326 Inset Cross Hatch Knob Set – HALF DUMMY
17327 Inset Cross Hatch Knob Mortise Set – PASSAGE
17328 Inset Cross Hatch Knob Mortise Set – PRIVACY
2-1/2″ ROSE SETS
17332 Inset Cross Hatch Knob Set – PASSAGE
17333 Inset Cross Hatch Knob Set – PRIVACY
17334 Inset Cross Hatch Knob Set – SECTIONAL PRIVACY
17335 Inset Cross Hatch Knob Set – FULL DUMMY
17336 Inset Cross Hatch Knob Set – HALF DUMMY
17320 Inset Cross Hatch Knob Only 2-1/4″
17176 Square Rose Only 2″
17177 Square Rose Only 2-1/2″
Solid Brass
1. Specify application.
2. Specify if pre-drilled adapters are required (part #9749).
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/8″.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.
6. Specify hand of door – RH/LH for mortise applications.
1. Specify pre-drilled adapter (#9749) for 2-1/8″ pre-drilled doors, which requires the large rose.
2. Specify interior mortise lock for quality installations.
3. All knobs and levers are interchangeable.
4. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
5. A door thickness greater than 1-3/4″ will require a #9900 thick door kit for mortise application.
6. SLAB edge is standard. Specify COIN or CROSS HATCH edge detail if required.
7. Combination strike and faceplate available for sectional tubular privacy function.
Knob Set – PASSAGE Includes two rosettes (passage), two knobs, passage latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ straight spindle (8mm), two rosette mount plates, two rosette mount plate hubs, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – PRIVACY Includes two rosettes (privacy), two knobs, privacy latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ swivel spindle (8mm), two rosette mount plates, two rosette mount plate hubs, privacy pin, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.
Knob Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm), two dummy rosette mount plates, two rosette mount plate hubs and mounting hardware.
Knob Set – HALF DUMMY Includes rosette, knob, dummy mount spindle, rosette mount plate hub and mounting hardware.
Knob Mortise Set – PASSAGE Includes two rosettes, two knobs, 4″ straight spindle (8mm), Accurate 9825 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.
Knob Mortise Set – PRIVACY Includes two rosettes, two knobs, turnpiece and backplate, emergency egress trim, 4″ straight spindle (8mm), Accurate 9839 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.
- Specify EDGE DETAIL — SLAB edge option is standard. If alternate EDGE DETAIL is required — make sure to specify as SUB (example – SUB COIN).
- If necessary, calculate the appropriate upcharge per lineal inch for COIN or CROSS HATCH (see retail price list).
- Custom escutcheon sizes are available.
- Standard escutcheon thickness is 1/4”— alternate thickness available upon request.
- Contact us to discuss custom edge details or profiles.
