17326
Inset Cross Hatch Knob and Rose

Inset Cross Hatch Knob 2-1/4″
Square Rose 2″

Solid Brass

1. Specify application.
2. Specify if pre-drilled adapters are required (part #9749).
3. Specify finish. If split finish is required, please indicate exterior/interior.
4. Specify door thickness. Standard thickness is 1-3/8″.
5. Specify backset.
– standard is 2-3/8″ for tubular.
– standard is 2-1/2″ for mortise.
6. Specify hand of door – RH/LH for mortise applications.

1. Specify pre-drilled adapter (#9749) for 2-1/8″ pre-drilled doors, which requires the large rose.
2. Specify interior mortise lock for quality installations.
3. All knobs and levers are interchangeable.
4. FULL LIP strikes are standard. Specify SUB “T” strike, if required.
5. A door thickness greater than 1-3/4″ will require a #9900 thick door kit for mortise application.
6. SLAB edge is standard. Specify COIN or CROSS HATCH edge detail if required.
7. Combination strike and faceplate available for sectional tubular privacy function.

Knob Set – PASSAGE Includes two rosettes (passage), two knobs, passage latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ straight spindle (8mm), two rosette mount plates, two rosette mount plate hubs, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.

Knob Set – PRIVACY Includes two rosettes (privacy), two knobs, privacy latch K x K (2-3/8″ backset), full lip strike, latch faceplate, 4″ swivel spindle (8mm), two rosette mount plates, two rosette mount plate hubs, privacy pin, dust box and mounting hardware. NOTE: if required, order pre-drilled adapter (part #9749) separately.

Knob Set – FULL DUMMY Includes two rosettes, two knobs, 4″ straight spindle (8mm), two dummy rosette mount plates, two rosette mount plate hubs and mounting hardware.

Knob Set – HALF DUMMY Includes rosette, knob, dummy mount spindle, rosette mount plate hub and mounting hardware.

Knob Mortise Set – PASSAGE Includes two rosettes, two knobs, 4″ straight spindle (8mm), Accurate 9825 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.

Knob Mortise Set – PRIVACY Includes two rosettes, two knobs, turnpiece and backplate, emergency egress trim, 4″ straight spindle (8mm), Accurate 9839 K x K interior mortise lock (2-1/2″ backset), strike, faceplate, dust box and mounting hardware.

• Specify EDGE DETAIL — SLAB edge option is standard. If alternate EDGE DETAIL is required — make sure to specify as SUB (example – SUB COIN).
• If necessary, calculate the appropriate upcharge per lineal inch for COIN or CROSS HATCH (see retail price list).

• Custom escutcheon sizes are available.
• Standard escutcheon thickness is 1/4”— alternate thickness available upon request.
• Contact us to discuss custom edge details or profiles.