17060
Multi Point Set Euro Sectional
Lever 4-1/2″
Square Collar 2″
-
Specifications
Part Number:17060
Part Description:Multi Point Set Euro Sectional
Product Dimensions:Lever 4-1/2″
Square Collar 2″Applications:17060 Lever Euro M/P Sectional Set – ENTRANCE
17061 Lever Euro M/P Sectional Set – FULL DUMMY
17062 Lever Euro M/P Sectional Set – ACTIVE DUMMY
17063 Lever Euro M/P Sectional Set – PATIO
Above sets include 17173 LeverMaterial:Solid Brass -
How to Order
Ordering Instructions:
1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify fixed or active exterior lever when ordering active dummy set.Remember:1. VERIFY door prep will be fully covered by sectional trim.
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm K x T/P (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
4. Cylinders INCLUDED with all applications (collection turnpiece attached).
5. Custom rose and cylinder collar sizes available.
6. SLAB edge is standard. Specify COIN or CROSS HATCH edge detail if required.
7. Strike not included.
8. Euro offset cylinders and custom lengths available upon request. -
Set Components
Lever Euro M/P Sectional Set – ENTRANCE Includes two rosettes, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and surface mounting screws.
Lever Euro M/P Sectional Set – FULL DUMMY Includes two rosettes, two levers, 4″ straight spindle (8mm), full dummy mounting hardware and surface mounting screws.
Lever Euro M/P Sectional Set – ACTIVE DUMMY Includes two rosettes, two levers, 4″ swivel spindle (8mm), full dummy mounting hardware for exterior rosette.
Lever Euro M/P Sectional Set – PATIO Includes two rosettes, two levers, one euro cylinder collar, euro profile half cylinder (31mm), 4″ straight spindle (8mm) and surface mounting screws.
-
Finishes
-
Documents
Classic Brass is available through a limited number of decorative hardware showrooms. We are proud of our dealers, and value our relationships with them. If you would like to locate an authorized dealer in your area, visit our dealers map. You may also submit inquiries or request a PDF catalog of our products via the form on our contact page or by emailing us at hello@classicbrass.com. Should you need immediate assistance, please call 716.763.1400 so that we may direct you to the appropriate person.
Lever 4-1/2″
Square Collar 2″
17060 Lever Euro M/P Sectional Set – ENTRANCE
17061 Lever Euro M/P Sectional Set – FULL DUMMY
17062 Lever Euro M/P Sectional Set – ACTIVE DUMMY
17063 Lever Euro M/P Sectional Set – PATIO
Above sets include 17173 Lever
Solid Brass
1. Specify application.
2. Specify finish. If split finish is required, please indicate exterior/interior.
3. Specify door thickness. Standard thickness is 1-3/4″.
4. Specify hand of door – RH/LH.
5. Specify fixed or active exterior lever when ordering active dummy set.
1. VERIFY door prep will be fully covered by sectional trim.
2. Standard euro profile application is LEVER HIGH – 92mm (hub-cylinder spacing).
3. Door thickness greater than 1-3/4″ will require longer euro cylinders and/or offset cylinders. 62mm K x T/P (31mm x 31mm) and 31mm Half Cylinder is standard for 1-3/4″ doors.
4. Cylinders INCLUDED with all applications (collection turnpiece attached).
5. Custom rose and cylinder collar sizes available.
6. SLAB edge is standard. Specify COIN or CROSS HATCH edge detail if required.
7. Strike not included.
8. Euro offset cylinders and custom lengths available upon request.
Lever Euro M/P Sectional Set – ENTRANCE Includes two rosettes, two levers, 4″ straight spindle (8mm), euro profile cylinder – 62mm – K x TP and surface mounting screws.
Lever Euro M/P Sectional Set – FULL DUMMY Includes two rosettes, two levers, 4″ straight spindle (8mm), full dummy mounting hardware and surface mounting screws.
Lever Euro M/P Sectional Set – ACTIVE DUMMY Includes two rosettes, two levers, 4″ swivel spindle (8mm), full dummy mounting hardware for exterior rosette.
Lever Euro M/P Sectional Set – PATIO Includes two rosettes, two levers, one euro cylinder collar, euro profile half cylinder (31mm), 4″ straight spindle (8mm) and surface mounting screws.
- Specify EDGE DETAIL — SLAB edge option is standard. If alternate EDGE DETAIL is required — make sure to specify as SUB (example – SUB COIN).
- If necessary, calculate the appropriate upcharge per lineal inch for COIN or CROSS HATCH (see retail price list).
- Custom escutcheon sizes are available.
- Standard escutcheon thickness is 1/4”— alternate thickness available upon request.
- Contact us to discuss custom edge details or profiles.
